The grids in this directory were generated on the geometry zip file here:
   -  https://aiaa-dpw.larc.nasa.gov/Workshop7/Geometry/2021-03-02_Version_01/DPW7geometries.zip
 
Each configuration is labeled with alpha_#.## (i.e. alpha_2.50), indicating the angle of attack from which the wing deformation was measured in a M=0.85 LoQ (low dynamic pressure) test condition at ETW.
 
The file within the DPW7geometries.zip file associated with each angle of attack is shown below:
   -  alpha_2.50: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_2.500deg_02_03_2021__WeP_in.igs
   -  alpha_2.75: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_2.750deg_02_03_2021__WeP_in.igs
   -  alpha_3.00: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_3.000deg_02_03_2021__WeP_in.igs
   -  alpha_3.25: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_3.250deg_02_03_2021__WeP_in.igs
   -  alpha_3.50: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_3.500deg_02_03_2021__WeP_in.igs
   -  alpha_3.75: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_3.750deg_02_03_2021__WeP_in.igs
   -  alpha_4.00: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_4.000deg_02_03_2021__WeP_in.igs
   -  alpha_4.25: DPW-7_WBT_IGES_in/low_q/DPW7_CRM_wbt_182_4.250deg_02_03_2021__WeP_in.igs
 
Note that while the geometry files include horizontal tail surfaces, those were removed prior to gridding.
 
Additionally, note that the farfield surfaces included in the geometry files are smaller than the current gridding best practices and the grids have farfield boundaries that have been extended further.