This README file documents the naming convention used
for Vassberg's DPW-7 multiblock/overset grid system.

Characters 1-4 describe the member (size) of the grid family.
  L1.T:  Refers to the      Tiny mesh (Level 1)
  L2.C:  Refers to the    Coarse mesh (Level 2)
  L3.M:  Refers to the    Medium mesh (Level 3)
  L4.F:  Refers to the      Fine mesh (Level 4)
  L5.X:  Refers to the eXtrafine mesh (Level 5)
  L6.X:  Refers to the Ultrafine mesh (Level 6)

Characters 6-8 describe the dynamic-pressure influence on the Aero-Elastic shape.
  NoQ:  Refers to the unloaded, undeflected geometry
  LoQ:  Refers to the  Low dynamic-pressure conditions of ETW-Run182
  HiQ:  Refers to the High dynamic-pressure conditions of ETW-Run237

Characters 10-12 indicate grid type and number of zones.
  MB5:  Refers to point-matched multi-block grid with 5 zones.
  OS4:  Refers to point-matched overset bridging grids with 4 zones.
 Note:  A complete overset grid is comprised of both the MB5+OS4 plot3d grids.

Characters 13-16 indicate that the file format is plot3d.
  64-bit Reals, Multi-Zone, 3D, No Iblanks

For example:
  1234567890123456
  L3.M.NoQ.MB5.p3d is the Medium Gridsize, Undeflected, Multiblock Grid, of 5 Zones
  L3.M.NoQ.OS4.p3d is the Medium Gridsize, Undeflected, Overset Bridges, of 4 Zones

Additional information is provided in the following file.
  Vassberg_DPW7_GridFamilyDimensions.pdf

JC Vassberg
28 JUN 2021